[DONE] Discussing the multisession cue

User avatar
iR0b0t
Posts: 3397
Joined: Mon Jun 08, 2026 1:26 am

Re: [DONE] Discussing the multisession cue

Post by iR0b0t »

iR0b0t wrote:
Jackal wrote:@iR0b0t will the disc page show that it's a multisession disc? or do we need to add a comment
It will be visible on the disc page, no need for the comments.
Is that okay the current way it is?
https://redump.info/disc/63778/
PX-760A (+30), PX-W4824TA (+98), GSA-H42L (+667), GDR-8164B (+102), SH-D162D (+6), SOHD-167T (+12)
User avatar
Nexy
Posts: 729
Joined: Mon Jun 08, 2026 1:26 am

Re: [DONE] Discussing the multisession cue

Post by Nexy »

Better, page shows info now too. Downloaded cue still missing extra REM lines for lead in/out and pregap.
Plextor PX-760A 1.07 (+30) : Plextor PX-716SA 1.11 (+30) : Plextor PX-W5224A 1.04 (+30) : Plextor PX-W4824 1.07 (+30) : Plextor PX-W4012TA 1.07 (+98) : Plextor PX-W1610TA (+99) : Plextor PX-W1210TA 1.10 (+99) : Lite-On LTR-48246S (+6) : Lite-On LTR-52246S (+6) : Lite-On LH-20A1H LL0DN (+6) : BenQ DW1655 BCIB (+618) : ASUS DRW-2014L1 1.02 (+6) : Yamaha CRW-F1 (+733) : Optiarc SA-7290H5 1H44 (+48) : ASUS BW-16D1HT 3.02 (+6)
Jackal
Posts: 2598
Joined: Mon Jun 08, 2026 1:26 am

Re: [DONE] Discussing the multisession cue

Post by Jackal »

I think we are in agreement that the Redump site can store the complete cuesheet, but it should only include the REM SESSION lines in the download .cue (and exclude the REM LEAD-OUT, REM LEAD-IN, REM PREGAP because they are standard values that should be the same always
Please hide the Lead-in, Lead-out, Pregap, Disc total lines from the disc page and exclude them from the .cue download as discussed before.
Last edited by Jackal on Sat Jul 27, 2019 12:43 pm, edited 1 time in total.
User avatar
iR0b0t
Posts: 3397
Joined: Mon Jun 08, 2026 1:26 am

Re: [DONE] Discussing the multisession cue

Post by iR0b0t »

@Jackal, all the extra lines beside "session number" are excluded from the cue downloads.

I will exclude them from being shown on the disc page, no problem.
The thing is just, i remember that somebody was wanting them to be shown and the disc total length to be calculated.
PX-760A (+30), PX-W4824TA (+98), GSA-H42L (+667), GDR-8164B (+102), SH-D162D (+6), SOHD-167T (+12)
Jackal
Posts: 2598
Joined: Mon Jun 08, 2026 1:26 am

Re: [DONE] Discussing the multisession cue

Post by Jackal »

I dont know for what purpose we would the disc total. Dreamcast didn't need it either.

@Nexy, the Carnivores dump seems to be missing the INDEX 01 for Track02. Can you try opening the .bin (without the .cue) as Mode2/2352 and see if it opens and shows the contents?
User avatar
Nexy
Posts: 729
Joined: Mon Jun 08, 2026 1:26 am

Re: [DONE] Discussing the multisession cue

Post by Nexy »

Looks fine to me

Code: Select all

REM SESSION 01
FILE "Carnivores (USA) (Track 1).bin" BINARY
  TRACK 01 MODE2/2352
    INDEX 01 00:00:00
REM SESSION 02
FILE "Carnivores (USA) (Track 2).bin" BINARY
  TRACK 02 MODE2/2352
    INDEX 01 00:00:00
I don't necessarily agree with removing the comments, there's no guarantee that standards are used, particularly with PC. Better to futureproof it in my opinion, since it's possible that some protection may put something in a huge pre-gap or something. There's no rule book that says things have to follow standard, they clearly don't on uncountable occasions.
Plextor PX-760A 1.07 (+30) : Plextor PX-716SA 1.11 (+30) : Plextor PX-W5224A 1.04 (+30) : Plextor PX-W4824 1.07 (+30) : Plextor PX-W4012TA 1.07 (+98) : Plextor PX-W1610TA (+99) : Plextor PX-W1210TA 1.10 (+99) : Lite-On LTR-48246S (+6) : Lite-On LTR-52246S (+6) : Lite-On LH-20A1H LL0DN (+6) : BenQ DW1655 BCIB (+618) : ASUS DRW-2014L1 1.02 (+6) : Yamaha CRW-F1 (+733) : Optiarc SA-7290H5 1H44 (+48) : ASUS BW-16D1HT 3.02 (+6)
Jackal
Posts: 2598
Joined: Mon Jun 08, 2026 1:26 am

Re: [DONE] Discussing the multisession cue

Post by Jackal »

We agreed to hide it until we find a disc that has different standards.

All the discs so far, including Bleemcast, have the same lead-out, lead-in, pregap lengths between sessions. They are formally specified in official documents, so it's unlikely that a disc will deviate from it.
Last edited by Jackal on Sun Jul 28, 2019 12:55 am, edited 1 time in total.
Jackal
Posts: 2598
Joined: Mon Jun 08, 2026 1:26 am

Re: [DONE] Discussing the multisession cue

Post by Jackal »

@iR0b0t, maybe you can add type = Single-Density Area + High-Density Area to the disc page of Dreamcast discs? the same way as is done with Multisession discs.

ps. I've updated (hopefully) all the existing Multisession discs to have the correct cuesheets and comments: https://redump.info/discs/quicksearch/ses … ents/only/
Last edited by Jackal on Sun Jul 28, 2019 4:28 am, edited 1 time in total.
User avatar
iR0b0t
Posts: 3397
Joined: Mon Jun 08, 2026 1:26 am

Re: [DONE] Discussing the multisession cue

Post by iR0b0t »

Jackal wrote:
iR0b0t wrote:This topic is done so far, I only have to update the newdisc form.
Yes, but plz answer my question about the Dreamcast discs
I did it already when i wrote my message, I mean the extra lines on Dreamcast discs should be visible.
PX-760A (+30), PX-W4824TA (+98), GSA-H42L (+667), GDR-8164B (+102), SH-D162D (+6), SOHD-167T (+12)
User avatar
iR0b0t
Posts: 3397
Joined: Mon Jun 08, 2026 1:26 am

Re: [DONE] Discussing the multisession cue

Post by iR0b0t »

Jackal wrote:I don't like the text "SD AREA" & "HD AREA". Can you change it to "Area", and the full text is too long?
Made it full text.
PX-760A (+30), PX-W4824TA (+98), GSA-H42L (+667), GDR-8164B (+102), SH-D162D (+6), SOHD-167T (+12)
Post Reply