DiscImageCreator

[bikerspade]

With an ASUS BW-16D1HT with RibShark's 3.10 fw on build 20240216, the following error is produced with aborts the dump for dumping any Audio CD (works fine with build 20230606):

Code: Select all

LBA[000000, 0000000]: [F:ReadCDForCheckingSubQ1stIndex][L:974]
    Opcode: 0xbe
    ScsiStatus: 0x02 = CHECK_CONDITION
    SenseData Key-Asc-Ascq: 03-11-05 = MEDIUM_ERROR - L-EC UNCORRECTABLE ERROR
lpCmd: be, 00, 00, 00, 00, 00, 00, 00, 01, f8, 01, 00
dwBufSize: 2448

[sarami]

I saw something odd

Added: show the error message.
Fixed: failed to dump audio disc (and CD-i Ready) when ASUS BW-16D1HT 3.02 is used.
https://www.mediafire.com/file/eq80y20l … st.7z/file

the following error is produced

3.02 did not occur. 3.10 mod only? I'm not sure.

[hkkane]

If anyone looking for USB adapter with IS611 chipset,Unitek Y-3324 is another choice

[HeroponRikiBestest]

I saw something odd

Added: show the error message.
Fixed: failed to dump audio disc (and CD-i Ready) when ASUS BW-16D1HT 3.02 is used.
https://www.mediafire.com/file/eq80y20l … st.7z/file

the following error is produced

3.02 did not occur. 3.10 mod only? I'm not sure.

Confirmed to also occur on my 3.10 Ribshark firmware drive. Could potentially be linked to a similar issue aaru has where audio cd dumping is broken on Ribshark firmware drives, but that's just a hunch.

[bikerspade]

It works with build 20230606, so there was a regression at some point afterwards.

[sarami]

added RegenerateToc for dumping CD-i format with multi-track disc
https://www.mediafire.com/file/eq80y20l … st.7z/file

It works with build 20230606, so there was a regression at some point afterwards.

Would you try to dump these discs and see if you get the same error?
1. Audio only disc.
2. Data only disc.
3. Data + Audio disc.

[bikerspade]

1. Audio only disc (fails at this point)

Code: Select all

LBA[000000, 0000000]: [F:ReadCDForCheckingSubQ1stIndex][L:974]
    Opcode: 0xbe
    ScsiStatus: 0x02 = CHECK_CONDITION
    SenseData Key-Asc-Ascq: 03-11-05 = MEDIUM_ERROR - L-EC UNCORRECTABLE ERROR
lpCmd: be, 00, 00, 00, 00, 00, 00, 00, 01, f8, 01, 00
dwBufSize: 2448

2. Data only disc
https://redump.info/disc/2007/

Code: Select all

AppVersion
        32 bit, AnsiBuild, 20240224T144036
/c2 val2 was omitted. set [16]
/c2 val3 was omitted. set [0]
/c2 val4 was omitted. set [0]
/sf val was omitted. set [60]
CurrentDirectory
        D:\MPF_3.1.0
WorkingPath
         Argument: ISO\DN3D_REG\DN3D_REG.bin
         FullPath: D:\MPF_3.1.0\ISO\DN3D_REG\DN3D_REG.bin
            Drive: D:
        Directory: \MPF_3.1.0\ISO\DN3D_REG\
         Filename: DN3D_REG
        Extension: .bin
StartTime: 2024-02-24T00:27:42-0600
Set the drive speed: 2822KB/sec
DiskSize of [D:\MPF_3.1.0\ISO\DN3D_REG]
        Total: 22000951091200 bytes
         Used:  2102318620672 bytes
        ---------------------------
        Space: 19898632470528 bytes
         => There is enough disk space for dumping
Check if scrambled reading is supported
[INFO] This drive supports scrambled reading
Check if subchannel pack mode is supported
LBA[000000, 0000000]: [F:ReadCDForCheckingSubPack][L:1254]
        Opcode: 0xbe
        ScsiStatus: 0x02 = CHECK_CONDITION
        SenseData Key-Asc-Ascq: 04-3e-02 = HARDWARE_ERROR - TIMEOUT ON LOGICAL UNIT
lpCmd: be, 00, 00, 00, 00, 00, 00, 00, 01, f8, 04, 00
dwBufSize: 2448
[WARNING] This drive does not support subchannel pack mode
Reading DirectoryRecord   25/  25
Checking EXE   76
[INFO] Protection can't be detected. /sf, /ss is ignored.
This drive (BW-16D1HT        3.10 WM01601KLZN4DA2714  ) can read data sectors at scrambled state [OpCode: 0xbe, C2flag: 1, SubCode: 0]
This drive (BW-16D1HT        3.10 WM01601KLZN4DA2714  ) can read data sectors at scrambled state [OpCode: 0xbe, C2flag: 1, SubCode: 1]
This drive (BW-16D1HT        3.10 WM01601KLZN4DA2714  ) can read data sectors at scrambled state [OpCode: 0xbe, C2flag: 1, SubCode: 2]
This drive (BW-16D1HT        3.10 WM01601KLZN4DA2714  ) can read data sectors at scrambled state [OpCode: 0xbe, C2flag: 1, SubCode: 4]
Checking SubQ adr (Track)  1/ 1
Checking reading lead-out -> OK (LBA 50849)
Set OpCode: 0xbe, SubCode: 1(Raw)
Checking SubQ ctl (Track)  1/ 1
Creating .scm (LBA)  50849/ 50849
No C2 errors
Copying .scm to .img

3. Data + Audio disc
https://redump.info/disc/86169/

Code: Select all

AppVersion
        32 bit, AnsiBuild, 20240224T144036
/c2 val2 was omitted. set [8]
/c2 val3 was omitted. set [0]
/c2 val4 was omitted. set [0]
/sf val was omitted. set [60]
CurrentDirectory
        D:\MPF_3.1.0
WorkingPath
         Argument: ISO\Manhole, The (USA)\Manhole, The (USA).bin
         FullPath: D:\MPF_3.1.0\ISO\Manhole, The (USA)\Manhole, The (USA).bin
            Drive: D:
        Directory: \MPF_3.1.0\ISO\Manhole, The (USA)\
         Filename: Manhole, The (USA)
        Extension: .bin
StartTime: 2024-02-24T00:33:32-0600
Set the drive speed: 1411KB/sec
DiskSize of [D:\MPF_3.1.0\ISO\Manhole, The (USA)]
        Total: 22000951091200 bytes
         Used:  2102679584768 bytes
        ---------------------------
        Space: 19898271506432 bytes
         => There is enough disk space for dumping
Check if scrambled reading is supported
[INFO] This drive supports scrambled reading
Check if subchannel pack mode is supported
LBA[000000, 0000000]: [F:ReadCDForCheckingSubPack][L:1254]
        Opcode: 0xbe
        ScsiStatus: 0x02 = CHECK_CONDITION
        SenseData Key-Asc-Ascq: 04-3e-02 = HARDWARE_ERROR - TIMEOUT ON LOGICAL UNIT
lpCmd: be, 00, 00, 00, 00, 00, 00, 00, 01, f8, 04, 00
dwBufSize: 2448
[WARNING] This drive does not support subchannel pack mode
[INFO] Protection can't be detected. /sf, /ss is ignored.
This drive (BW-16D1HT        3.10 WM01601KLZN4DA2714  ) can read data sectors at scrambled state [OpCode: 0xbe, C2flag: 1, SubCode: 0]
This drive (BW-16D1HT        3.10 WM01601KLZN4DA2714  ) can read data sectors at scrambled state [OpCode: 0xbe, C2flag: 1, SubCode: 1]
This drive (BW-16D1HT        3.10 WM01601KLZN4DA2714  ) can read data sectors at scrambled state [OpCode: 0xbe, C2flag: 1, SubCode: 2]
This drive (BW-16D1HT        3.10 WM01601KLZN4DA2714  ) can read data sectors at scrambled state [OpCode: 0xbe, C2flag: 1, SubCode: 4]
Checking SubQ adr (Track) 17/17
Checking reading lead-out -> OK (LBA 111603)
Set OpCode: 0xbe, SubCode: 1(Raw)
Checking SubQ ctl (Track) 17/17
Creating .scm (LBA)  111607/111607

[napa8475]

one Alpha-DVD log of redumper contribution, took me five hours for dumping,

no reply and no complain, please.

https://www.suruga-ya.jp/product/detail/186028357

log of redumper
https://mega.nz/file/M9pTjZQT#MPhH40YQG … X7JA30zwYU

[sarami]

Uploaded test version.
Windows: https://www.mediafire.com/file/eq80y20l … st.7z/file
Linux: https://www.mediafire.com/file/uw3e03kd … ar.gz/file
- changed the descrambling range.
-- support "audio track, data sector, there is a sync" /viewtopic.php?t=47312 … scrambled/
-- re-support descrambling the sector that bit 7 .. 5 of the mode byte is used. https://github.com/saramibreak/DiscImag … issues/269
- changed "subs control" and "subs indexes" to "subs desync".
-- changed the control flag of the cue file, it prefers TOC. https://github.com/saramibreak/DiscImag … issues/268

LBA[000000, 0000000]: [F:ReadCDForCheckingSubQ1stIndex][L:974]
    Opcode: 0xbe
    ScsiStatus: 0x02 = CHECK_CONDITION
    SenseData Key-Asc-Ascq: 03-11-05 = MEDIUM_ERROR - L-EC UNCORRECTABLE ERROR
lpCmd: be, 00, 00, 00, 00, 00, 00, 00, 01, f8, 01, 00
dwBufSize: 2448

It's called when dumps the disc that pregap exists in the track 1.

EDIT (2024-03-10)
fixed failed to descramble of the multi-session disc with test version.
EDIT (2024-03-18)
fixed failed to dump GD-ROM with test version.

[hkkane]

Why DIC doesn't show SecuROM in Copy Protection section?