DiscImageCreator

[Madroms]

I have a problem with a multisession disc.
It is very slow beginning at sector 61105 then hangs the ODD after a while. I need to switch it off electrically then on to have access to it again.

It's a known issue. https://github.com/saramibreak/DiscImag … /issues/41
Use DVD model (PX-7xx).

Great, it works with 716A. Thanks.
I didn't see the issues on GH.

Adding a warning or a stop (like when using ODD without latest firmware) when someone try to dump a multisession disc with PW4012 and other ODD not compatible: is it possible?

I pretty sure you will have some other users asking the same in the future

[reentrant]

Hello. I have problem with newest version of DICUI (1.8). Today i tried to dump Midtown Madness which turned out it's verification, but 1.8 version made 3 different result and 1.7.1 two times in row matched to dump on main site. I spotted 2 times this problem occured also with other disc I tried:

Code: Select all

Creating .scm (LBA)  37068/301245[F:ProcessReadCD][L:288] GetLastError: 1117, Nie mo┐na wykonaŠ ┐╣dania z powodu b│ŕdu urz╣dzenia We/Wy.

(Cannot execute task, because of input output device error)

I have Plextor PX-755SA

I have similar errors. I think they are related to bad cabling and controller is dropping the device from time to time.

[zcal]

I'm trying to dump the HD area of my Dreamcast discs.  I have a TS-H192C drive, which is either recommended or untested but should work.  sarami confirmed its ability to dump the HD area a few years ago.

I get the following errors when I try to dump from any of my Dreamcast discs.  I'm using DIC version 20201101.

Code: Select all

StartTime: 2020-12-11T11:17:20-0600
Set the drive speed: 1411KB/sec
[WARNING] /c2 isn't set. The result of dumping may be incorrect if c2 error exists.
This drive can read data sectors at scrambled state [OpCode: 0xbe, C2flag: 0, SubCode: 0]
This drive can read data sectors at scrambled state [OpCode: 0xbe, C2flag: 0, SubCode: 1]
This drive can read data sectors at scrambled state [OpCode: 0xbe, C2flag: 0, SubCode: 2]
LBA[045000, 0x0afc8]: [F:ExecSearchingOffset][L:185]
        Opcode: 0xbe
        ScsiStatus: 0x02 = CHECK_CONDITION
        SenseData Key-Asc-Ascq: 05-24-00 = ILLEGAL_REQUEST - INVALID FIELD IN CDB
lpCmd: be, 04, 00, 00, af, c8, 00, 00, 01, f8, 04, 00
dwBufSize: 2448
Couldn't read data sectors at scrambled state [OpCode: 0xbe, C2flag: 0, SubCode: 4]
LBA[045000, 0x0afc8]: [F:ReadCDForCheckingSubQAdr][L:949]
        Opcode: 0xbe
        ScsiStatus: 0x02 = CHECK_CONDITION
        SenseData Key-Asc-Ascq: 05-24-00 = ILLEGAL_REQUEST - INVALID FIELD IN CDB
lpCmd: be, 04, 00, 00, af, c8, 00, 00, 02, f8, 04, 00
dwBufSize: 2448
Checking SubQ adr (Track)  3/ 3
LBA[045100, 0x0b02c]: [F:ReadCDForCheckingSubRtoW][L:1091]
        Opcode: 0xbe
        ScsiStatus: 0x02 = CHECK_CONDITION
        SenseData Key-Asc-Ascq: 05-24-00 = ILLEGAL_REQUEST - INVALID FIELD IN CDB
lpCmd: be, 04, 00, 00, b0, 2c, 00, 00, 01, f8, 04, 00
dwBufSize: 2448

Reading DirectoryRecord   14/  14
Set OpCode: 0xbe, SubCode: 4(Pack)
LBA[044999, 0x0afc7]: [F:ProcessReadCD][L:288]
        Opcode: 0xbe
        ScsiStatus: 0x02 = CHECK_CONDITION
        SenseData Key-Asc-Ascq: 05-24-00 = ILLEGAL_REQUEST - INVALID FIELD IN CDB
EndTime: 2020-12-11T11:17:39-0600

[Madroms]

I have a problem with latest DIC test vs. DIC 20200921 for a multisession disc, on track 3 (data track, 2nd session).
Logs, picture of 1st sector of data track and onscreen reports of DIC test attached.

Dump with latest test version seems wrong.

[sarami]

I have a problem with latest DIC test

Deleted unused code. (Not test)
https://www.mediafire.com/file/eq80y20l … st.7z/file

I'm trying to dump the HD area of my Dreamcast discs.  I have a TS-H192C drive

Sorry, I don't have it anymore, so I can't test it.

[Madroms]

I have a problem with latest DIC test

Deleted unused code. (Not test)
https://www.mediafire.com/file/eq80y20l … st.7z/file

Thanks. Logs attached.
It seems ok now. Let me know if you find something weird with these latest logs.

[user7]

I got a CDi prototype CD-r. Dumped it with 760SA and 716A. Same hashes, but has Main Error. I'm guessing these are mastering related?

I got the same hash all three times I dumped it https://drive.google.com/file/d/1rRANLF … sp=sharing

[sarami]

I got a CDi prototype CD-r. Dumped it with 760SA and 716A. Same hashes, but has Main Error. I'm guessing these are mastering related?

I got the same hash all three times I dumped it https://drive.google.com/file/d/1rRANLF … sp=sharing

It's weird.
There is "01 80 00 62" in LBA 0, but "01 82 00 62" in LBA 1.
From LBA -1 to LBA -150 is also "01 80 00 62" according to _disc.txt

Code: Select all

========== Check Pregap sync, msf, mode ==========
      1 : 00 FF FF FF FF FF FF FF FF FF FF 00 01 80 00 62
      2 : 00 FF FF FF FF FF FF FF FF FF FF 00 01 80 00 62
      3 : 00 FF FF FF FF FF FF FF FF FF FF 00 01 80 00 62
      4 : 00 FF FF FF FF FF FF FF FF FF FF 00 01 80 00 62
      5 : 00 FF FF FF FF FF FF FF FF FF FF 00 01 80 00 62
        :
    149 : 00 FF FF FF FF FF FF FF FF FF FF 00 01 80 00 62
    150 : 00 FF FF FF FF FF FF FF FF FF FF 00 01 80 00 62
    151 : 00 FF FF FF FF FF FF FF FF FF FF 00 01 82 00 62
    152 : 00 FF FF FF FF FF FF FF FF FF FF 00 01 82 01 62

[A Murder of Crows]

Hey Sarami, got any feedback on this:

/viewtopic.php?t=28230 … peg-dumps/

[fuzzball]

Is this error caused by a scratched disc?
I dumped it three times, all with the same result.

logs: https://www.dropbox.com/s/fji0tajumxrm7f2
db: https://redump.info/disc/38495/

*EDIT*
The dump by IsoBuster had no errors and the hashes matched.

*EDIT2*
The test version (20201223) had the same result.
https://www.dropbox.com/s/sm2is6ve9ex2d1r