DiscImageCreator

[pool7]

Trying to dump a PS1 Unlicensed disc (Breaker Pro); tried with both stable and latest test version (20191227):
The drive makes some funny noises a couple of times, then it errors out.
Here are the logs, as well as a recording of the noises:
https://mega.nz/#!OmxiSQYC!c_B_Dr4ka1JE … s6DMYZRytk

[sarami]

Trying to dump a PS1 Unlicensed disc (Breaker Pro); tried with both stable and latest test version (20191227):
The drive makes some funny noises a couple of times, then it errors out.

Please check if the sector view of isobuster can read the last sector.

[pool7]

How do I know what's the last sector?
One thing I noticed when checking IsoBuster: the files in the disc are 19.1MB; however if I check the properties of the CD/Session/Track, IsoBuster says the disc size is 921.290.752 bytes (449.849 blocks).
I tried entering 449849 in the Sector View window, and it did the same noise as when trying to dump with DIC(however I'm not sure if that's the number I should have entered), then showed this error:
Device reported Error code : 03/02/8D

[sarami]

One thing I noticed when checking IsoBuster: the files in the disc are 19.1MB; however if I check the properties of the CD/Session/Track, IsoBuster says the disc size is 921.290.752 bytes (449.849 blocks).

Yes. TOC says the last sector is 449.849.

Code: Select all

========== TOC ==========
      Data Track  1, LBA        0 -   449848, Length   449849
                                              Total    449849

I tried entering 449849 in the Sector View window, and it did the same noise as when trying to dump with DIC(however I'm not sure if that's the number I should have entered), then showed this error:
Device reported Error code : 03/02/8D

Perhaps it needs swap trick. See wiki https://github.com/saramibreak/DiscImageCreator/wiki "Dumping Guide for CD with swap"
At least, kreon drive supports it.

[user7]

Regarding pool7's disc, i read online it might have a fake TOC of 100 minutes.

---

sarami, i dumped a disc with two different drives - a plextor and LG. the hashes were the same, and tracks split the same, but the LG has a different write offset value. Is there a reason?
https://drive.google.com/file/d/15Nr7dM … sp=sharing

[sarami]

the LG has a different write offset value.

http://www.mediafire.com/file/eq80y20l9 … st.7z/file
- fixed: parse driveOffset.txt

[user7]

Another one, this is a PC press kit CD-Rom (not CD-R).

I always say about c2 error.
1. use "/c2 4096", not "/c2 20".
2. resurface the disc.
3. change the disc if possible.
4. change the drive.

Okay, i tried with those settings, same results. Disc dumps fine in isobuster on two different drives, but not with dic
There is another one on ebay, expensive but I bought it.

Returning to this old discussion. The second copy arrived and dumps fine with DIC. It is the same hashes that the old one was getting out of IsoBuster.

It seems DIC is more sensitive than IsoBuster to triggering c2 errors for some reason.

[pool7]

Perhaps it needs swap trick. See wiki https://github.com/saramibreak/DiscImageCreator/wiki "Dumping Guide for CD with swap"
At least, kreon drive supports it.

When trying to run the swap command, I get invalid argument:

D:\apps\redump\dic_test_20191227>DiscImageCreator.exe swap H foo.bin
AppVersion
        x86, AnsiBuild, 20191227 233113
Invalid argument
If you see the usage, execute .exe without argument

D:\apps\redump\dic_test_20191227>



PS:
If I try to dump after running the 'close' command, it seems to read the lead-out of the original disc; however it does nothing else and the drive keeps 'clicking' forever:
AppVersion
        x86, AnsiBuild, 20191116 221523
/c2 val2 is omitted. set [0]
/sf val is omitted. set [60]
CurrentDirectory
        D:\apps\redump\DICUI_1.15-net472
WorkingPath
         Argument: D:\tmp_redump_up\to_Submit\BreakerPro\BP_swap2.bin
         FullPath: D:\tmp_redump_up\to_Submit\BreakerPro\BP_swap2.bin
            Drive: D:
        Directory: \tmp_redump_up\to_Submit\BreakerPro\
         Filename: BP_swap2
        Extension: .bin
StartTime: 2020/01/03(Fri) 18:18:15
Set the drive speed: 3528KB/sec
This drive supports [OpCode: 0xd8, SubCode: 1]
This drive supports [OpCode: 0xd8, SubCode: 2]
This drive supports [OpCode: 0xd8, SubCode: 8]
Checking reading lead-out -> OK

[sarami]

When trying to run the swap command, I get invalid argument:

D:\apps\redump\dic_test_20191227>DiscImageCreator.exe swap H foo.bin

Missing the drive speed.

----
As user7 says, if your disc have a fake TOC, I want to know the volume space size. Please upload 16th sector using Isobuster.

[pool7]

Thanks; indeed the drive speed missing was the issue.
Now the swap command worked and started dumping; however at one point DIC crashed.

Here are the logs, along with the cmd output and DIC crash details:
https://mega.nz/#!S3ZHFCYC!RPS1QRJU6pZq … R_kLxqFmHc

Here's sector 16 from IsoBuster, both RAW and non-RAW:
https://mega.nz/#!36J1SQBT!H7rWI4Zn4sU0 … MstQQcM7m4