DiscImageCreator

[F1ReB4LL]

I add the DIC files:
HDR-0105
Hope that helps.

Well, it seems it only saves the .sub part for the SD zone, but not for HD Will try to ask sarami to add the .sub reading/decoding for the HD part as well (it's in the same format, the only difference is a slightly different MSF/AMSF encoding after the 99:59:74 point).

[archivr205]

Hi, thank you for this great and sophisticated tool!

I may be doing something wrong but for me the 2017-03-03 version gives me a different CRC than an older version I was using (August 26, 2015 or some date in that month according to the log).

The Old CRC matches Redump, IsoBuster, and ImgBurn, while the new one doesn't match any
I am using a non-plextor BDRW drive to rip IBM-PC CDs (so far just single track data discs). I noticed this difference in multiple discs

I will get back if you need more data, I know that testing more versions to see where the break happens would help probably.
The command I am using is "DiscImageCreator cd <letter> <name> # /c2" where the speed number I have tried variations 0, 8, or 24. /d8 is not supported on my drive.

Hope to get this sorted so I can submit good PC dumps.
PS once I get this working, I was looking for a good way to find the PVD

[sarami]

I will get back if you need more data,

Please.

[F1ReB4LL]

About Dreamcast: why does DIC only save .sub for the SD area, but not for the HD area?

[MrX_Cuci]

Latest version doesn't seem to rip from DVD anymore:
E:\DIC3-3--2017\Release_ANSI>DiscImageCreator.exe dvd u: fast.bin
OS
        Windows 8 Professional  64bit
AppVersion
        x86, AnsiBuild, Mar  3 2017 01:42:21
Invalid argument

[iR0b0t]

Latest version doesn't seem to rip from DVD anymore
DiscImageCreator.exe dvd u: fast.bin

Did you try to use no extension or *.iso instead of *.bin ?
Sarami might have included an exception on that combination: dvd + *.bin

[archivr205]

More info on my issue:

In github 20170303, in _mainError.txt I get the following error when dumping a CD (IBM PC):
"This sector is data, but the header doesn't exist"
on Every Single LBA

It creates a .bin file with the same exact size as the Redump verified IsoBuster file, but different CRC. Also, when loading the new image into IsoBuster, it comes up as audio instead of data/file system

In github release 20161119, it dumps normally and matches Redump and IsoBuster output, and is data, using the same command as above

[F1ReB4LL]

Unable to dump [SS] [T-20601G] Hokuto no Ken with the 2016-11-19 DIC build (stucks at "Reading DirectoryRecord   17/  18"):

C:\Tools\DiscImageCreator_New>DiscImageCreator.exe cd H: dump 4 /c2 1024 4096 4
OS
        Windows 7 Ultimate Service Pack 1 64bit
AppVersion
        x86, AnsiBuild, Nov 19 2016 18:33:03
CurrentDirectory
        C:\Tools\DiscImageCreator_New
WorkingPath
         Argument: dump
         FullPath: C:\Tools\DiscImageCreator_New\dump
            Drive: C:
        Directory: \Tools\DiscImageCreator_New\
         Filename: dump
        Extension:
Start time: 2017-03-12(Sun) 23:55:50
Set the drive speed: 705KB/sec
This drive support [command: 0xd8, subch: 00]
This drive support [command: 0xd8, subch: 0x1]
This drive support [command: 0xd8, subch: 0x2]
This drive support [command: 0xd8, subch: 0x3]
This drive support [command: 0xd8, subch: 0x8]
Checking reading lead-out -> OK
Checking SubQ adr (Track)  2/ 2
Checking SubRtoW (Track)  2/ 2
Reading DirectoryRecord   17/  18

With the earlier builds, like, the one from 2015-10-22, it dumps fine:

C:\Tools\DiscImageCreator>DiscImageCreator.exe cd H: dump 4 /c2 1024 4096 4
OS
        Windows 7 Ultimate Service Pack 1 64bit
AppVersion
        x86, AnsiBuild, Oct 22 2015 22:39:26
CurrentDir
        C:\Tools\DiscImageCreator
InputPath
         path: dump
        drive:
          dir:
        fname: dump
          ext:
Start: 2017-03-12(Sun) 22:49:53
This drive support [command: 0xd8, subch: 00]
This drive support [command: 0xd8, subch: 0x1]
This drive support [command: 0xd8, subch: 0x2]
This drive support [command: 0xd8, subch: 0x3]
This drive support [command: 0xd8, subch: 0x8]
Checking reading lead-out
Read command: 0xd8, Subcode reading mode: Pack
Creating bin from 165787 to 165787 (LBA) 165787
Reading lead-out: OK
Reading DirectoryRecord   18/  18
Allocating memory for C2 errors: 4096/4096
Read command: 0xd8, Subcode reading mode: Raw
Created img (LBA) 165787/165785

No C2 errors
Copying .scm to .img
Descrambling data sector of img(LBA) 130865/130865
Exec ""C:\Tools\DiscImageCreator\EccEdc.exe" check "C:\Tools\DiscImageCreator\dump.img""
Checking data sectors (LBA) 165785/165785
User data vs. ecc/edc match all
Creating bin, cue and ccd (Track)  2/ 2
Freeing allocated memory for C2 errors: 4096/4096
Calculating hash: dump (Subs indexes) (Track 1).bin
Calculating hash: dump (Subs indexes) (Track 2).bin
Calculating hash: dump (Track 1).bin
Calculating hash: dump (Track 2).bin
Calculating hash: dump.img

End: 2017-03-12(Sun) 23:06:24

[sarami]

*2017-03-14 test
http://www.mediafire.com/file/eq80y20l9 … or_test.7z
- fixed: did't work gdrom dumping
- fixed: Reading DirectoryRecord
- fixed: /se option

About Dreamcast: why does DIC only save .sub for the SD area, but not for the HD area?

Need to use gd command. The sub I dumped.
http://www.mediafire.com/file/j3b9mx7ez … areaSub.7z

Latest version doesn't seem to rip from DVD anymore:

dvd <DriveLetter> <Filename> <DriveSpeed(0-72)> [/c] [/f]

More info on my issue:

Thanks. What are you using a drive? (see drive.txt)

Unable to dump [SS] [T-20601G] Hokuto no Ken

I couldn't dump [SS] Madou Monogatari. Fixed and confirmed to dump Madou, but I don' t know whether Hokuto no ken is fixed or not.

[F1ReB4LL]

/viewtopic.php?p=24112#p24112 -- sarami claims it should save the .sub for the HD zone as well, if the "gd" command is used. Could you try again with the latest test version of DIC?