DiscImageCreator

[sarami]

Error logs are huge with the latest build. Like 1GB with a perfect disc.

*EDIT* Seems data only discs have this problem

*EDIT2* Seems to be the case with certain discs only

maybe is this?
/viewtopic.php?p=23658#p23658

[F1ReB4LL]

Bug with https://redump.info/disc/34115/ -- https://www.sendspace.com/file/ofhrnr -- Track 22's pregap incorrectly detected (latest test version of DIC).
Bug with https://redump.info/disc/7090/ -- https://www.sendspace.com/file/yju8rp -- Track 31's pregap incorrectly detected (latest test version of DIC).

[sarami]

Bug with https://redump.info/disc/34115/ -- https://www.sendspace.com/file/ofhrnr -- Track 22's pregap incorrectly detected (latest test version of DIC).

Plz subdump log.

Bug with https://redump.info/disc/7090/ -- https://www.sendspace.com/file/yju8rp -- Track 31's pregap incorrectly detected (latest test version of DIC).

Probably fixed.

EDIT
improved: detecting MCN sector.
fixed: log for pce disc
fixed: pce disc (audio sector of data track)

EDIT2
improved: log for directory record

[scsi_wuzzy]

Is there any special process required to use this with SCSI drives? I've tried a few thus far (Plextor Ultraplex 40, Plextor 1210TS, Yamaha CRW-F1SX, etc), but all have failed without even printing the TOC information from the disc or creating any .sub/.ccd/.bin files. In contrast, when I use my IDE drives (non-Plextor), it prints some TOC information, creates the .sub/.ccd/.bin files, and then dies due to not supporting scrambled read.

Edit: SCSI card is an Adaptec AIC-7850. I can do tests on another card, if that would be helpful. I had been using that one because it has WIndows 7 32-bit drivers while the other cards don't.

As far as I know, there aren't any issues with the SCSI bus. I was able to upgrade the drive firmwares over it, and I've been able to copy files from data discs inserted in the drives. The 1210TS drives didn't cooperate in WIndows 7, though, so I've done the tests here in XP.

Here's the stdout from when I ran the drive on the Ultraplex 40:

Code: Select all

C:\DiscImageCreator\Release_ANSI>DiscImageCreator.exe cd j ace1 4
OS
        Windows XP Home Edition Service Pack 3 32bit
AppVersion
        x86, AnsiBuild, Oct 16 2014 14:37:59
CurrentDir
        C:\DiscImageCreator\Release_ANSI
InputPath
         path: ace1
        drive:
          dir:
        fname: ace1
          ext:
Start: 2015-02-24(Tue) 13:34:56
[F:ModeSense10][L:108] OperationCode: 0x5a
ScsiStatus: 02, CHECK_CONDITION
SenseData Key-Asc-Ascq: 05-20-00, ILLEGAL_REQUEST - INVALID COMMAND OPERATION CO
DE
End: 2015-02-24(Tue) 13:34:58

And here's the drivelog.txt from the same run (all other log files are 0 bytes):

Code: Select all

StorageAdapterDescriptor
                  Version: 32
                     Size: 32
    MaximumTransferLength: 4294967295 (bytes)
     MaximumPhysicalPages: 17
            AlignmentMask: 0
           AdapterUsesPio: True
         AdapterScansDown: False
          CommandQueueing: True
      AcceleratedTransfer: True
                  BusType: BusTypeScsi
          BusMajorVersion: 2
          BusMinorVersion: 0
IoctlScsiGetAddress
        Length: 4
    PortNumber: 3
        PathId: 0
      TargetId: 2
           Lun: 0
InquiryData
              DeviceType: ReadOnlyDirectAccessDevice (CD/DVD etc)
     DeviceTypeQualifier: Active
      DeviceTypeModifier: 0
          RemovableMedia: Yes
                Versions: 2
      ResponseDataFormat: 2
               HiSupport: No
                 NormACA: No
           TerminateTask: No
                    AERC: No
        AdditionalLength: 51
           MediumChanger: No
               MultiPort: No
       EnclosureServices: No
               SoftReset: No
            CommandQueue: No
          LinkedCommands: Yes
      RelativeAddressing: No
                VendorId: PLEXTOR 
               ProductId: CD-ROM PX-40TS  
    ProductRevisionLevel: 1.14
          VendorSpecific: 08/30/02 01:14      

I tried the tests on another machine (also Windows XP 32-bit), but for some reason I've not yet been able to determine DIC crashes prior to starting the read (for either IDE or SCSI drives). If I can get that sorted out I'll maybe have some more info.

[scsi_wuzzy]

Does anyone know the compatibility of the PX-716AL? It's the slot-loading variant of the PX-716. In theory it would have the same features at the tray-loading version, but I notice that the FW version is much different (1.02, dated 12/1/05 vs 1.11, dated 3/23/07).

[Sotho Tal Ker]

It should work without problems.

[sarami]

Uploaded 20150227 of DIC, 20141217 of EccEdc

Here's the stdout from when I ran the drive on the Ultraplex 40:

This problem had already fixed at latest test version. Could you test the latest release version.

Does anyone know the compatibility of the PX-716AL?

Could you exec px_d8.exe. I want to know this drive supports a read in/out.

[scsi_wuzzy]

This problem had already fixed at latest test version. Could you test the latest release version.

I seem to get the same behavior. No image files are created, and all the logs are empty except the drive log file. I've only tested the Ultraplex 40 so far. I'll try the 1210S when I get a chance. Edit: I tested the 1210S and got similar results. I'm pasting the logs at the bottom of this message.

Standard out:

Code: Select all

DiscImageCreator.exe cd i ace 4
OS
        Windows XP Home Edition Service Pack 3 32bit
AppVersion
        x86, AnsiBuild, Feb 27 2015 21:53:49
CurrentDir
        C:\Documents and Settings\User\Desktop\DiscImageCreator_20150227\DiscIma
geCreator\Release_ANSI
InputPath
         path: ace
        drive:
          dir:
        fname: ace
          ext:
Start: 2015-02-28(Sat) 18:53:45
[F:ModeSense10][L:120] OperationCode: 0x5a
ScsiStatus: 02, CHECK_CONDITION
SenseData Key-Asc-Ascq: 05-20-00, ILLEGAL_REQUEST - INVALID COMMAND OPERATION CO
DE
[F:ReadBufferCapacity][L:143] OperationCode: 0x5c
ScsiStatus: 02, CHECK_CONDITION
SenseData Key-Asc-Ascq: 05-20-00, ILLEGAL_REQUEST - INVALID COMMAND OPERATION CO
DE
End: 2015-02-28(Sat) 18:53:47

Drive log:

Code: Select all

=========================== StorageAdapterDescriptor ==========================
                  Version: 32
                     Size: 32
    MaximumTransferLength: 4294967295 (bytes)
     MaximumPhysicalPages: 17
            AlignmentMask: 0
           AdapterUsesPio: True
         AdapterScansDown: False
          CommandQueueing: True
      AcceleratedTransfer: True
                  BusType: BusTypeScsi
          BusMajorVersion: 2
          BusMinorVersion: 0
============================= IoctlScsiGetAddress =============================
        Length: 4
    PortNumber: 3
        PathId: 0
      TargetId: 2
           Lun: 0
================================= InquiryData =================================
              DeviceType: ReadOnlyDirectAccessDevice (CD/DVD etc)
     DeviceTypeQualifier: Active
      DeviceTypeModifier: 0
          RemovableMedia: Yes
                Versions: 2
      ResponseDataFormat: 2
               HiSupport: No
                 NormACA: No
           TerminateTask: No
                    AERC: No
        AdditionalLength: 51
           MediumChanger: No
               MultiPort: No
       EnclosureServices: No
               SoftReset: No
            CommandQueue: No
          LinkedCommands: Yes
      RelativeAddressing: No
                VendorId: PLEXTOR 
               ProductId: CD-ROM PX-40TS  
    ProductRevisionLevel: 1.14
          VendorSpecific: 08/30/02 01:14      
    Undefined SCSIOP_MODE_SENSE10 Command on this drive

Could you exec px_d8.exe. I want to know this drive supports a read in/out.

I'll test it ASAP. The drive is in shipping right now, unfortunately. I asked about its compatibility mostly because they're readily available on eBay for reasonably cheap. I went ahead and bit the bullet and purchased one. I'll test it once it arrives (probably next week sometime).

Edit: 1210S logs.

Standard out:

Code: Select all

DiscImageCreator.exe cd i ace3 4
OS
        Windows XP Home Edition Service Pack 3 32bit
AppVersion
        x86, AnsiBuild, Feb 27 2015 21:53:49
CurrentDir
        C:\Documents and Settings\User\Desktop\DiscImageCreator_20150227\DiscIm
geCreator\Release_ANSI
InputPath
         path: ace3
        drive:
          dir:
        fname: ace3
          ext:
Start: 2015-02-28(Sat) 19:17:40
[F:ReadBufferCapacity][L:143] GetLastError: 1117, The request could not be perf
rmed because of an I/O device error.

End: 2015-02-28(Sat) 19:17:42

Drive log:

Code: Select all

=========================== StorageAdapterDescriptor ==========================
                  Version: 32
                     Size: 32
    MaximumTransferLength: 4294967295 (bytes)
     MaximumPhysicalPages: 17
            AlignmentMask: 0
           AdapterUsesPio: True
         AdapterScansDown: False
          CommandQueueing: True
      AcceleratedTransfer: True
                  BusType: BusTypeScsi
          BusMajorVersion: 2
          BusMinorVersion: 0
============================= IoctlScsiGetAddress =============================
        Length: 4
    PortNumber: 3
        PathId: 0
      TargetId: 1
           Lun: 0
================================= InquiryData =================================
              DeviceType: ReadOnlyDirectAccessDevice (CD/DVD etc)
     DeviceTypeQualifier: Active
      DeviceTypeModifier: 0
          RemovableMedia: Yes
                Versions: 2
      ResponseDataFormat: 2
               HiSupport: No
                 NormACA: No
           TerminateTask: No
                    AERC: No
        AdditionalLength: 51
           MediumChanger: No
               MultiPort: No
       EnclosureServices: No
               SoftReset: No
            CommandQueue: No
          LinkedCommands: Yes
      RelativeAddressing: No
                VendorId: PLEXTOR 
               ProductId: CD-R   PX-W1210S
    ProductRevisionLevel: 1.06
          VendorSpecific: 02/18/03  10:10     
============================= ModeParmeterHeader10 ============================
             ModeDataLength: 62
                 MediumType: 0
    DeviceSpecificParameter: 0
      BlockDescriptorLength: 8
=========== ModeSense10 (CDVD Capabilities & Mechanism Status Page) ===========
                  PageCode: 0000
                     PSBit: No
                PageLength: 0
                   CDRRead: No
                   CDERead: No
                   Method2: No
                DVDROMRead: No
                  DVDRRead: No
                DVDRAMRead: No
                  CDRWrite: No
                  CDEWrite: No
                 TestWrite: No
                 DVDRWrite: No
               DVDRAMWrite: No
                 AudioPlay: No
                 Composite: No
            DigitalPortOne: No
            DigitalPortTwo: No
                Mode2Form1: No
                Mode2Form2: No
              MultiSession: No
        BufferUnderrunFree: No
                      CDDA: No
              CDDAAccurate: No
               RWSupported: No
           RWDeinterleaved: No
                C2Pointers: No
                      ISRC: No
                       UPC: No
        ReadBarCodeCapable: No
                      Lock: No
                 LockState: No
             PreventJumper: No
                     Eject: Yes
      LoadingMechanismType: caddy
            SeparateVolume: No
       SeperateChannelMute: No
       SupportsDiskPresent: No
           SWSlotSelection: No
         SideChangeCapable: No
        RWInLeadInReadable: No
          ReadSpeedMaximum: 10798 (62x)
        NumberVolumeLevels: 1799
                BufferSize: 62335
          ReadSpeedCurrent: 10531 (60x)
                       BCK: No
                       RCK: Yes
                      LSBF: Yes
                    Length: 0
         WriteSpeedMaximum: 256 (1x)
         WriteSpeedCurrent: 4096 (23x)
    CopyManagementRevision: 5645

[sarami]

Thank you test.
Upload test version in the 1st post. Could you test please.
And I want to know that your PX-40TS, PX-W1210S supports the reading in/out and d8 command. Could you exec px_d8.exe.

[scsi_wuzzy]

And I want to know that your PX-40TS, PX-W1210S supports the reading in/out and d8 command. Could you exec px_d8.exe.

It looks like both the Ultraplex 40 and the 1210S work with the px_d8.exe. They return results, at least, but I suppose it's possible the results are incorrect for some reason.

Here's the output when I run it on the Ultraplex 40:

Code: Select all

C:\Documents and Settings\User\Desktop\px_d8_1.01A>px_d8 i 0
Sector: 0
MSF: 00:01:74
Combined offset: +2712 bytes / +678 samples

And here's the output from the 1210S (same disc):

Code: Select all

C:\Documents and Settings\User\Desktop\px_d8_1.01A>px_d8 j 0
Sector: 0
MSF: 00:02:00
Combined offset: +400 bytes / +100 samples

As an interesting aside, my old ATAPI Creative Labs RW121032E, which I attempted (possibly successfully) to cross-flash as a Plextor, works with px_d8 as well:

Code: Select all

C:\Documents and Settings\User\Desktop\px_d8_1.01A>px_d8 h 0
Sector: 0
MSF: 00:02:00
Combined offset: +404 bytes / +101 samples

Upload test version in the 1st post. Could you test please.

This version isn't working for me either. I've got some time to spare today, so I'm going to test on another machine and make sure this isn't some bizarre machine-specific issue. I'll update my post after I get those tests done (either with failure logs or success stories).