I'm trying to dump Railroad Tycoon 2 but I'm not able to get a consistent gap detection in EAC.
In the cue sheet generated by CloneCD I get 1.74 for all tracks.
I've also attached subs.
Thank you for your help.
Railroad Tycoon 2
Re: Railroad Tycoon 2
... and second sub
By the way, is there a guide available on this forum or anywhere on the internet on how to analyze the subs ? I want to learn so not to upload subs anytime I have this kind of issues.
Thx.
By the way, is there a guide available on this forum or anywhere on the internet on how to analyze the subs ? I want to learn so not to upload subs anytime I have this kind of issues.
Thx.
Last edited by TAurus on Sun Mar 21, 2010 1:39 pm, edited 1 time in total.
Re: Railroad Tycoon 2
hi TAurus
basically you would have to read ECMA-130 (chapters: 20, 21, 22) and examine .sub with Subcode Analyzer
here's a brief example with Mode 2 section (most often cause) affecting EAC's gap size detection
basically you would have to read ECMA-130 (chapters: 20, 21, 22) and examine .sub with Subcode Analyzer
here's a brief example with Mode 2 section (most often cause) affecting EAC's gap size detection
ECMa130 @20091225 :: friidump 0.5.3 :: PSXstuff :: SaturnPrograms :: MyStupidPrograms2 :: [url=http://www.mediafire.com/?q1mbksntoje]MyStupidPrograms[/url]
Re: Railroad Tycoon 2
I did not have the time to study the documentation, so I appreciate if someone can analyze the subs.
Thank you.
Thank you.
Re: Railroad Tycoon 2
which are problematic tracks?
briefly checking 1st file it looks like data->audio gap = 2s; audio->audio gaps = 1.74s
which is not uncommon pattern
btw for some reason RAR complains about unexpected end of archive for those attachments
briefly checking 1st file it looks like data->audio gap = 2s; audio->audio gaps = 1.74s
which is not uncommon pattern
btw for some reason RAR complains about unexpected end of archive for those attachments
ECMa130 @20091225 :: friidump 0.5.3 :: PSXstuff :: SaturnPrograms :: MyStupidPrograms2 :: [url=http://www.mediafire.com/?q1mbksntoje]MyStupidPrograms[/url]
Re: Railroad Tycoon 2
The problematic track is the first one (data->audio). I get 2.74 or 1.74. I've attached again the subs.
Last edited by TAurus on Tue Apr 06, 2010 2:08 pm, edited 1 time in total.
Re: Railroad Tycoon 2
The files gets corrupted when attached to forum. 
(
Using a 2.74 sec gap I get -588 write offset.
If I use 3sec gap I get 0 write offset.
(Using a 2.74 sec gap I get -588 write offset.
If I use 3sec gap I get 0 write offset.
Last edited by TAurus on Tue Apr 06, 2010 2:19 pm, edited 1 time in total.
Re: Railroad Tycoon 2
I finally read the documentation and did a check with subcode analyzer and I get 2.0 sec for the first track and 1.74 for the rest of them. The problem now is that I have only zero's if I go back 2.0 seconds. I need to get back at least 2.74 to find some data. This is with a +667 drive. If 2.0 sec is the real gap I suppose I need a drive with even larger read offset... Is this correct ?