Redump Forum

Posted: **Fri Feb 10, 2012 6:26 pm**

Got a drive capable of the D8 command yet, I'm still having issues getting my Audio Track hashes to match up, was hoping if I posted it here, someone would be able to spot my error if that's possible.

This is for https://redump.info/disc/18028/

Here is my PX_D8.exe read out

Code: Select all

C:\Users\rcw003\Desktop>px_d8.exe H 0
Sector: 0
MSF: 00:02:01
Combined offset: -880 bytes / -220 samples

and here is my EAC log

Code: Select all

Exact Audio Copy V0.99 prebeta 5 from 4. May 2009

EAC extraction logfile from 10. February 2012, 17:12

Unknown Artist / Unknown Title

Used drive  : PLEXTOR DVDR   PX-708A   Adapter: 3  ID: 0

Read mode               : Secure
Utilize accurate stream : Yes
Defeat audio cache      : Yes
Make use of C2 pointers : Yes

Read offset correction                      : -220
Overread into Lead-In and Lead-Out          : Yes
Fill up missing offset samples with silence : Yes
Delete leading and trailing silent blocks   : No
Null samples used in CRC calculations       : Yes
Used interface                              : Native Win32 interface for Win NT & 2000
Gap handling                                : Appended to next track

Used output format : Microsoft PCM Converter
Sample format      : 44.100 kHz, 16 Bit, Stereo


TOC of the extracted CD

     Track |   Start  |  Length  | Start sector | End sector 
    ---------------------------------------------------------
        1  |  0:00.00 |  0:06.00 |         0    |      449   
        2  |  0:06.00 |  0:07.01 |       450    |      975   


Track  2

     Filename C:\Users\rcw003\Music\Track02.bin

     Peak level 98.0 %
     Track quality 100.0 %
     Test CRC CB36007F
     Copy CRC CB36007F
     Copy OK

No errors occurred

End of status report

I've went through all my EAC settings a number of times so I'm not sure what I'm doing wrong, any insight would be great.

Thanks

Posted: **Fri Feb 10, 2012 8:11 pm**

EAC cannot overread into track 2's pregap in a mixed mode CD when combined offset correction is a negative value, even when drive can overread into leadin/out. Moreover, EAC cannot detect any pregap in data track + single audio disc. Two workarounds:

-PerfectRip.

-Another drive with big offset correction value in order to get a positive offset correction value. Then, you have to use a hex editor to prepend 352800 zeroed bytes.

Posted: **Fri Feb 10, 2012 8:16 pm**

If you have a Plextor you should use Perfectrip to dump the tracks.
In this case you don´t get matching hashes because EAC has a bug (ONLY in discs with one data track and one audio track) that detects always a 0.00 sec gap instead of the true one. So if you add 150 sectors of silence (00's) to the beggining of the extracted track you should get matching results.

Anyway, in this case, you must dump the high density track to verify the dump!

Posted: **Sat Feb 11, 2012 4:20 am**

708 is known to have issues due to a problematic chipset.. You're prolly better of getting a newer version (like 716/755/760) or a CDRW plexwriter if you can

Posted: **Sat Feb 11, 2012 5:05 am**

It misses gaps sometimes in PR, but that is the only issue I had so far

Redump Forum

Plextor PX-708A and PX_D8

Plextor PX-708A and PX_D8

Re: Plextor PX-708A and PX_D8

Re: Plextor PX-708A and PX_D8

Re: Plextor PX-708A and PX_D8

Re: Plextor PX-708A and PX_D8