Page 1 of 1
PVD ripping
Posted: Fri Sep 15, 2017 5:05 am
by haynor666
Simple question - how I can I extract PVD info from IBM PC discs ? Disc Image Creator will do this for me ?
At the moment I don't have access to my plextor (moved into PC at my work) so I can't test DIC.
Re: PVD ripping
Posted: Fri Sep 15, 2017 9:34 am
by reentrant
Sector 16, offset 320-370 in isobuster.
Newest DIC puts PVD to one of the log files.
Re: PVD ripping
Posted: Fri Sep 15, 2017 11:07 am
by haynor666
Ok, I'll try new DIC, thanks for info.
Re: PVD ripping
Posted: Tue Sep 19, 2017 2:47 pm
by haynor666
Well, and I still don't know where this PVD data is in this DIC mess
Exact location, please ?
EDIT. Ok but what exactly I should put there to validate data?
Example for interstate '76 install disc:
0000000000000000 0000000000000000 0000000000000000 0000000000000000 ?
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 00
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 00
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 00
30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 00 ?
Re: PVD ripping
Posted: Tue Sep 19, 2017 3:02 pm
by iR0b0t
You can find it in *
_mainInfo.txt
copy whole lines like follows
Code: Select all
0320 : 20 20 20 20 20 20 20 20 20 20 20 20 20 32 30 30 200
0330 : 30 31 32 31 32 31 30 33 39 33 39 30 30 00 32 30 0121210393900.20
0340 : 30 30 31 32 31 32 31 30 33 39 33 39 30 30 00 30 00121210393900.0
0350 : 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 E0 000000000000000.
0360 : 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 0000000000000000
0370 : E0 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
Re: PVD ripping
Posted: Tue Sep 19, 2017 3:10 pm
by haynor666
That works, thanks
Re: PVD ripping
Posted: Tue Sep 19, 2017 3:13 pm
by iR0b0t
If you can attach all DIC files to your posts (exclude all large files: *.bin, *.img, *.scm and *_sub.txt)
If you use the best compression rate your archives will be like 2 MB at max.
Re: PVD ripping
Posted: Tue Sep 19, 2017 3:16 pm
by haynor666
Final question - Errors count. Where to get this info ?
Interstate files attached.
Re: PVD ripping
Posted: Tue Sep 19, 2017 8:48 pm
by idlord
You can get the Error Count by using CDmage, open the cue file, then highlight Track 1 located under Session 1, and hit 'Scan for Corruption'.