Page 29 of 354

Re: DiscImageCreator

Posted: Wed Feb 05, 2014 5:03 pm
by Hustle
I'm having a problem, Plextor W4824TA connected via USB,

The last version use to work, but stopped working, it was producing the same error message as below, I'm using the latest version and I'm still having the same problem,
C:\Dump>DiscImageCreator.exe cd h: dump 32
OS
        MajorVersion: 6, MinorVersion: 1, BuildNumber: 7601
        PlatformId: 2, CSDVersion: Service Pack 1
AppVersion
        x86, AnsiBuild, Feb  4 2014 17:26:45
CurrentDir
        C:\Dump
InputPath
         path: dump
        drive:
          dir:
        fname: dump
          ext:
Start -> 2014-02-05(Wed) 21:57:47
[F:ScsiGetAddress][L:69] GetLastError: 50, The request is not supported.

[F:ReadTOCText][L:311] GetLastError: 121, The semaphore timeout period has expired.

[F:ReadTOCFull][L:225] ScsiStatus: 02-CHECK_CONDITION
SenseData, Key:Asc:Ascq 06:29:00, UNIT_ATTENTION - POWER ON, RESET, OR BUS DEVICE RESET OCCURRED
End -> 2014-02-05(Wed) 21:57:51

C:\Dump>

Re: DiscImageCreator

Posted: Thu Feb 06, 2014 5:44 pm
by MrX_Cuci
Get a missing DLL file error with latest WIP. MSVCRT120.DLL, which relates to MS C++ Visual. tried installing the x64 redistributable package, but error still shows.

Re: DiscImageCreator

Posted: Thu Feb 06, 2014 6:23 pm
by Jackal
MrX_Cuci wrote:Get a missing DLL file error with latest WIP. MSVCRT120.DLL, which relates to MS C++ Visual. tried installing the x64 redistributable package, but error still shows.
Grab the x86 one from here: http://www.microsoft.com/en-us/download … x?id=40784

But yeah, dependencies are annoying (PCSX2 needs the same file)

Re: DiscImageCreator

Posted: Sat Feb 15, 2014 4:19 am
by sarami
I bought PX-4824TA (fw:1.07) and test it via USB(http://www.owltech.co.jp/products/drive ... P2_U3.html) in my PC(Win 7 x64 SP1).

>Hustle
I didn't confirm in my USB/PC.

>pablogm123
I confirmed that didn't run exactly when enabled c2 option. (didn't get a subchannel)
I tried to do the transfer length to less 8KB, but didn't change.

Re: DiscImageCreator

Posted: Sun Feb 16, 2014 1:12 pm
by DJoneK
I've been having a similar error that Hustle is reporting ever since I had to install a new HDD when my old one died.  It used to work great without errors, but once I installed a new HDD, I had to install some drivers BEFORE installing Windows 7, otherwise I would get an error.  Something about newer HDDs needing that driver before installation.  It had to do with Intel RAID chipset IIRC.

This is the error I'm getting.

[F:ScsiGetAddress][L:59] GetLastError: 50, The request is not supported.

The interesting thing is that the discs still dump fine.

Another interesting thing is that since I re-installed, Exact Audio Copy is also having trouble finding one of my drives (one that came with my PC, not my plextor).  So I think this problem could be related to that pesky driver that I had to install BEFORE installing windows on a brand new HDD.  It's the only thing I can guess that's causing this behavior.

Re: DiscImageCreator

Posted: Tue Feb 18, 2014 10:30 pm
by sarami
fixed ScsiGetAddress

Re: DiscImageCreator

Posted: Mon Mar 03, 2014 3:23 pm
by MrX_Cuci
Hi,

Look here: /viewtopic.php?t=9310 … r-2-turbo/ Audio track written as data track in CUE using latest WIP. let me know if you need anything from that dump.

Re: DiscImageCreator

Posted: Tue Mar 04, 2014 12:46 am
by sarami
Please tell me the first 16 byte of the track 2.
If this sector is data track of mode 1, the data is below.

Code: Select all

00 FF FF FF FF FF FF FF FF FF FF 00 01 21 70 01
If this sector is audio track, 16 byte is between 00 to FF.

Also please show me .sub.txt from LBA 5993 to LBA 5997.

Re: DiscImageCreator

Posted: Tue Mar 04, 2014 1:58 pm
by MrX_Cuci

Code: Select all

LBA :5994

0000 : 00 FF FF FF FF FF FF FF  FF FF FF 00 01 21 69 01

Code: Select all

LBA[005993, 0x01769], Data, Copy NG, TOC[TrackNum-01, Index-01, RelativeTime-01:19:68, AbsoluteTime-01:21:68] RtoW:ZERO, RtoW:ZERO, RtoW:ZERO, RtoW:ZERO
LBA[005994, 0x0176A], Data, Copy NG, TOC[TrackNum-01, Index-01, RelativeTime-01:19:69, AbsoluteTime-01:21:69] RtoW:ZERO, RtoW:ZERO, RtoW:ZERO, RtoW:ZERO
LBA[005995, 0x0176B], Audio, 2ch, Copy NG, Pre-emphasis No, TOC[TrackNum-02, Index-01, RelativeTime-00:00:00, AbsoluteTime-01:21:70] RtoW:ZERO, RtoW:ZERO, RtoW:ZERO, RtoW:ZERO
LBA[005996, 0x0176C], Audio, 2ch, Copy NG, Pre-emphasis No, TOC[TrackNum-02, Index-01, RelativeTime-00:00:01, AbsoluteTime-01:21:71] RtoW:ZERO, RtoW:ZERO, RtoW:ZERO, RtoW:ZERO
LBA[005997, 0x0176D], Audio, 2ch, Copy NG, Pre-emphasis No, TOC[TrackNum-02, Index-01, RelativeTime-00:00:02, AbsoluteTime-01:21:72] RtoW:ZERO, RtoW:ZERO, RtoW:ZERO, RtoW:ZERO

Re: DiscImageCreator

Posted: Wed Mar 05, 2014 3:11 am
by sarami
MrX_Cuci wrote:

Code: Select all

LBA :5994

0000 : 00 FF FF FF FF FF FF FF  FF FF FF 00 01 21 69 01

Code: Select all

LBA[005993, 0x01769], Data, Copy NG, TOC[TrackNum-01, Index-01, RelativeTime-01:19:68, AbsoluteTime-01:21:68] RtoW:ZERO, RtoW:ZERO, RtoW:ZERO, RtoW:ZERO
LBA[005994, 0x0176A], Data, Copy NG, TOC[TrackNum-01, Index-01, RelativeTime-01:19:69, AbsoluteTime-01:21:69] RtoW:ZERO, RtoW:ZERO, RtoW:ZERO, RtoW:ZERO
LBA[005995, 0x0176B], Audio, 2ch, Copy NG, Pre-emphasis No, TOC[TrackNum-02, Index-01, RelativeTime-00:00:00, AbsoluteTime-01:21:70] RtoW:ZERO, RtoW:ZERO, RtoW:ZERO, RtoW:ZERO
LBA[005996, 0x0176C], Audio, 2ch, Copy NG, Pre-emphasis No, TOC[TrackNum-02, Index-01, RelativeTime-00:00:01, AbsoluteTime-01:21:71] RtoW:ZERO, RtoW:ZERO, RtoW:ZERO, RtoW:ZERO
LBA[005997, 0x0176D], Audio, 2ch, Copy NG, Pre-emphasis No, TOC[TrackNum-02, Index-01, RelativeTime-00:00:02, AbsoluteTime-01:21:72] RtoW:ZERO, RtoW:ZERO, RtoW:ZERO, RtoW:ZERO
How about the first 16 byte of LBA 5995?

I uploaded app. (improved GetMode Function for the moment.)