Redump Forum

sarami wrote:The version is too old.

20190629 193630

Try this http://www.mediafire.com/file/eq80y20l9 … st.7z/file

Tried this and get the same thing.

Interestingly when I try and load the iso created with xbox backupcreator into an iso tool to get the layout it comes back with invalid TOC entry

Added some logs into _maininfo.txt. http://www.mediafire.com/file/eq80y20l9 … st.7z/file
Upload logs again, plz.

Transfer length was too large.
Fixed it. Test plz. http://www.mediafire.com/file/eq80y20l9 … st.7z/file

sarami wrote:Transfer length was too large.

Code: Select all

uiDirPos: 341431, TransferLength: 82

Fixed it. Test plz. http://www.mediafire.com/file/eq80y20l9 … st.7z/file

I'm away for the next few days but should be able to test on Monday 18th.

Since last weekend, I've been working a lot to understand OpCode 0xF1 and test firmwares with it and I've managed to find that my HL-DT-ST GH24NSD1 LG00 supports it. However the laser is pretty bad by design and it has problem with one feature (FlushDriveCache) that works with ASUS BW-16D1HT 3.02 (Official / DE). So GH24NSD1 probably shouldn't be supported until I've figured out if it could be good and stable to use with DiscImageCreator.

On the other hand, I've tested HL-DT-ST WH16NS60 1.00 (Official / DE) and it works great!

Thank you sarami for providing me with a test version for Linux to let me test it and I will (together with other users) test a lot of firmwares for PCB Revision JB7 2011.11.17, JB8 2015.05.08, JBC5 2012.05.02, JB9 2015.09.03
... and more

olofolleola4 wrote:Thank you sarami for providing me with a test version for Linux

Also uploaded Windows test build.
And other changes are here.
- added: support for make install command [Linux only] (Thx pseiler)
- added: detect SecuROM 4.xx
               -> output SecuROM DLL header to _volDesc.txt
               -> if app finds "InterShield Cabinet File" or "MicroSoft Cabinet File", decompress it [Windows only]
- added: output ISRC country, owner, year, serial to _disc.txt
- changed: Data and Time format (ISO8601)
- fixed: search PSX anti-mod string

sarami wrote:Transfer length was too large.

Code: Select all

uiDirPos: 341431, TransferLength: 82

Fixed it. Test plz. http://www.mediafire.com/file/eq80y20l9 … st.7z/file

I was having the same problem - but I tried with the new test version you shared here - and it worked.  Thanks!

sadikyo wrote:I was having the same problem - but I tried with the new test version you shared here - and it worked.  Thanks!

Thanks test. I want to see your disc log. Would you upload them?

sarami wrote:

sadikyo wrote:I was having the same problem - but I tried with the new test version you shared here - and it worked.  Thanks!

Thanks test. I want to see your disc log. Would you upload them?

Yes - this is the one that worked with the test version