Page 26 of 354
Re: DiscImageCreator
Posted: Sat Nov 23, 2013 2:19 pm
by pablogm123
You have released the fully updated package finally, including the Unicode release. Many thanks.
I am waiting
this disc to correct that entry and to test properly your tool, the DC dumping function. I hope that dumping the high density zone with my PX-W4824TU, my old Samsung 10x CD-RW as trap disc and your tool will be a piece of cake.
Re: DiscImageCreator
Posted: Mon Dec 16, 2013 3:26 am
by Sotho Tal Ker
A few things I noticed using the latest version:
- Sometimes when starting DIC and the drive is not spinning already I get an error message:
Code: Select all
[F:ReadTOCFull][L:274] SCSI bus status codes:02-CHECK_CONDITION
Sense data, Key:Asc:Ascq:06:29:00(UNIT_ATTENTION. POWER ON, RESET, OR BUS DEVICE RESET OCCURRED)
- When dumping to a subfolder, DIC crashes when that subfolder does not exist, instead of creating it or exiting properly if that is not possible. Happens also when using absolute paths.
- When dumping to a subfolder, DIC does not create the .dat file correctly. The file is created, but hashing does not occur. DIC just end without hashing. When dumping to the current folder or an absolute path, hashing works ok.
Re: DiscImageCreator
Posted: Mon Dec 16, 2013 5:52 pm
by MrX_Cuci
Using the latets release I get this error occasionally:
Code: Select all
Probleemhandtekening:
Gebeurtenisnaam van probleem: BEX64
Naam van de toepassing: DiscImageCreator.exe
Versie van toepassing: 0.0.0.0
Tijdstempel van toepassing: 5290f291
Naam van foutmodule: MSVCR100.dll
Versie van foutmodule: 10.0.30319.415
Tijdstempel van foutmodule: 4d26d15a
Uitzonderingsmarge: 000000000007029c
Uitzonderingscode: c0000417
Uitzonderingsgegevens: 0000000000000000
Versie van besturingssysteem: 6.1.7601.2.1.0.256.1
Landinstelling-id: 1043
Aanvullende informatie 1: a364
Aanvullende informatie 2: a364456de18e1aa52ae3d36073db6dd8
Aanvullende informatie 3: 7e49
Aanvullende informatie 4: 7e4957650347756ba79fdd0fa4ac390e
Lees de onlineprivacyverklaring:
[url]http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0413[/url]
Als de onlineprivacyverklaring niet beschikbaar is, lees dan onze offlineprivacyverklaring:
C:\Windows\system32\nl-NL\erofflps.txt
This happens after:
Code: Select all
D:\DiscImageCreator\x64\Release>DiscImageCreator.exe -rall y: 4 wing5
OS
MajorVersion: 6, MinorVersion: 1, BuildNumber: 7601
AppVersion
x64, Unicode build
BuildDate
Nov 24 2013 03:23:10
Current dir
D:\DiscImageCreator\x64\Release
Input File Name
path: wing5
drive:
dir:
fname: wing5
ext:
Start -> 2013-12-16(Mon) 23:29:19
Checking reading lead-out
Creating bin from 314275 to 314275 (LBA) 314275
Reading Lead-out: OK
Creating img(LBA) 314274/314274
Has not occured with release 27-3-2013
Re: DiscImageCreator
Posted: Tue Dec 17, 2013 12:16 am
by sarami
Sotho Tal Ker wrote:- When dumping to a subfolder, DIC crashes when that subfolder does not exist, instead of creating it or exiting properly if that is not possible. Happens also when using absolute paths.
fixed.
>MrX_Cuci
I don't know about detail at present.
EDIT: re-fix
Re: DiscImageCreator
Posted: Thu Dec 19, 2013 4:48 am
by MrX_Cuci
Extra info: Those are data only discs
Re: DiscImageCreator
Posted: Tue Dec 31, 2013 6:03 am
by Jackal
pablogm123 wrote:Problems dumping from a PX-W4824TU drive, which works fine with another programs:
Failed to read CD for MCN [F:ReadTOCFull][L:1819]
DeviceIoControl with SCSI_PASS_THROUGH_DIRECT command failed [F:ReadCDForSearchi
ngOffset][L:989], GetLastError: 121, The semaphore timeout period has expired.
End -> 2013-10-28(Mon) 14:56:48
TheHustle is having a similar issue with his PX-W4824TA in this enclosure:
http://www.ebay.co.uk/itm/261352383960
I just tried a PX-W4824TA with this cable:
http://www.ebay.com/itm/221041878419 and it works fine..
So I'm wondering if this error is caused by certain types of enclosures? or is it really a windows/software issue?
@sarami: x64 builds are no longer working with the newest version:
32bit still working (although it needs msvcr120.dll now.. can't you compile without this dependancy?)
Re: DiscImageCreator
Posted: Tue Dec 31, 2013 7:00 am
by pablogm123
Mine is actually a TU drive, the same drive in a USB 2.0 enclosure, NEC chipset perhaps. Of course latest official firmware.
And I have absolutely no software which installs filter drivers (lower and upper filters) and no SPTD layer. I am fully against that kind of things, so no CloneCD, Daemon Tools... for me in my main OS (if I eventually need them, I run them from a secondary OS installed into an eSATA hard disk). This very likely has something to do with the 8 KB transfers for USB/IEEE-1394 drives suggestion I suggested a time ago.
PX-755SA via JMB363 (a PCIe card, latest jraid.sys driver) works nicely.
Re: DiscImageCreator
Posted: Tue Dec 31, 2013 9:00 am
by Sotho Tal Ker
You need to install "Visual C++ Redistributable Packages for Visual Studio 2013" to get it working again.
Re: DiscImageCreator
Posted: Tue Dec 31, 2013 2:49 pm
by Nexy
If the cable works and the enclosure doesn't, then it's obviously an issue with the enclosure and not the fault of DIC or windows.
Re: DiscImageCreator
Posted: Tue Dec 31, 2013 3:03 pm
by pablogm123
I am pretty sure that it's a fault of DIC handling transfers via USB/IEEE-1394, at least with certain enclosures. CDTool, PerfectRip and the «unnameable» works nicely with my PX-W4824TU, and this drive is just an externalized PX-W4824TA.