Redump Forum

pablogm123 wrote:My current wishlist:

-An option (for the -rall and -rgd modes) so that the C2 pointers are used only for purely informative purporses, without absolutely re-reads, like the old PerfectRip does. I mean the program will read and dump into a .c2/.c2e file the raw C2 pointers provided by the drive, but won't re-read anything marked as bad by the C2 pointers. This way I will know if a rip is good (no further action required) or bad: to resurface and clean the CD until getting 0 C2 errors, to try another drive, to try another read speeds or simply replace the CD if nothing works to get a flawless dump without re-reads. Of course, the log file should report if the dump was flawless or not flawless.

-The suggestion posted above applied to the -ra mode as well. And I would like that you could implement offset correction for the -ra mode: it would apply, as default option, the standard one defined by the AccurateRip database plus the possibilty of override it via the add parameter implemented in the -rall mode.

C2 switch for GD-ROM ripping does work now, but unfortunately the dumped .sub is invalid (contains non-sense data). Without C2 switch the .sub is valid and the extra frame is no longer present. Anyway, the actual dump (with/without C2 error reporting) matches the expected.

The same one for main channel / 8, because there are 2352 bytes for main channel and 294 bytes (one bit per byte of main channel) for C2 pointers. And this way will proceed PF if you enter 0 as c2 read offset correction bit(s).

it seems that DiscImageCreator doesn't detect PregapMode (ccd value) and always sets it to '0', even though many discs have a different value there..