DiscImageCreator

[sarami]

Now the swap command worked and started dumping; however at one point DIC crashed.

No scrambled data. Perhaps PX-760A doesn't support swap trick.

Here's sector 16 from IsoBuster, both RAW and non-RAW:

volume space size is 0x265b. It's 9819 sectors. 9819 * 2048 = 20109312 bytes.

It's easy to use volume space size instead of TOC, but I'm not sure volume space size is correct disc size.

[pool7]

Yes, the space used by all files as seen in Windows Explorer is indeed 20109312 bytes.

So, I guess I'm out of luck, unless I can find another drive that supports swap trick.

[user7]

sarami, im still redumping my ps4 bd-r's with the new dic build. A few of the redumps match the isobuster dump, here's an example: https://drive.google.com/file/d/13xTymU … sp=sharing

I wanted to share these logs to match in case they are useful for study.

[zcal]

I'm testing dumping with a Plextor PX-708A using the 20191223 release of DiscImageCreator.  I'm able to dump a Sega Saturn disc correctly in Windows, but I get the below errors in Linux using the same parameters.  I have the same issue with the 20191116 release.

Code: Select all

[zcal@computer disc]$ ./DiscImageCreator_linux.out cd /dev/sr0 foo.bin 24
AppVersion
        x64, AnsiBuild, 20191223 223711
CurrentDirectory
        /home/zcal/download/disc
WorkingPath
         Argument: foo.bin
         FullPath: /home/zcal/download/disc/foo.bin
            Drive: /
        Directory: home/zcal/download/disc/
         Filename: foo
        Extension: .bin
StartTime: 2020/01/12(Sun) 08:34:34
[F:ReadEeprom][L:912] GetLastError: 1, Operation not permitted
Please wait for 25000 milliseconds until the device is returned
[F:SetDiscSpeed][L:775] GetLastError: 1, Operation not permitted
Please wait for 25000 milliseconds until the device is returned
[WARNING] /c2 isn't set. The result of dumping may be incorrect if c2 error exists.
[F:ExecSearchingOffset][L:114] GetLastError: 1, Operation not permitted
Please wait for 25000 milliseconds until the device is returned
lpCmd: d8, 00, 00, 00, 00, 00, 00, 00, 00, 01, 00, 00
dwBufSize: 2352
This drive doesn't support [OpCode: 0xd8, SubCode: 0]
[F:ExecSearchingOffset][L:114] GetLastError: 1, Operation not permitted
Please wait for 25000 milliseconds until the device is returned
lpCmd: d8, 00, 00, 00, 00, 00, 00, 00, 00, 01, 01, 00
dwBufSize: 2368
This drive doesn't support [OpCode: 0xd8, SubCode: 1]
[F:ExecSearchingOffset][L:114] GetLastError: 1, Operation not permitted
Please wait for 25000 milliseconds until the device is returned
lpCmd: d8, 00, 00, 00, 00, 00, 00, 00, 00, 01, 02, 00
dwBufSize: 2448
This drive doesn't support [OpCode: 0xd8, SubCode: 2]
Retry 1/10 after 10000 milliseconds
[F:ExecSearchingOffset][L:114] GetLastError: 1, Operation not permitted
Please wait for 25000 milliseconds until the device is returned

[sarami]

I get the below errors in Linux

Try to use su or sudo.

[Nextria]

Hello,

I am having problems dumping some Japanese Dreamcast games. I got a px-708a drive with firmware 1.04. If I insert the Dreamcast disk it gets recognized as audio and DIC sees it.

When I want to dump it I get an error that I am not on the latest firmware.

So I update to 1.12, but now it not recognize the disk, it just keeps spinning. If I install 1.04 again
It will see the disk but get the error again.

Is there a command to skip the firmware check ?

[zcal]

Try to use su or sudo.

That fixed it.  Thanks.
But why does DIC require root privileges?

[F1ReB4LL]

Seen quite a lot of dumps recently with incorrect gaps due to first sector is EAN. You need to implement a better gap detection logic: when the EAN or ISRC sector is detected and its P-channel is 0x00, you need to check the next sector's P and Q channels: if the Q-channel's track number is increased and the P-channel is filled with 0xFF, then the EAN/ISRC sector belongs to the next track.

[FatArnold]

Try to use su or sudo.

That fixed it.  Thanks.
But why does DIC require root privileges?

Many SCSI commands require it.

[F1ReB4LL]

Is there a command to skip the firmware check ?

No command, but you can remove this check from the sources and recompile.

/viewtopic.php?p=25410#p25410 - or try this build (3 months old, but I don't remember any DC-related changes recently).